AG8旗舰厅·(中国大陆)集团Apple Storeag8旗舰厅

Product search
Mingbang Ahout Us
Home: PRODUCTS / Car paint / Hardener
 
   
Hardener

 
e技术参数.jpg

Product Category :( epoxy polyamide) quick-drying, two-component, free of aluminum and zinc primer ingredients 

Uses: car parts, chassis or patch 

Mixing ratio: Epoxy primer: special hardener: thinner 4: 1: 3 (depending on the temperature conditions optional) 

Mixed use time: 3 hours at 20 ℃


e施工指导.jpg

Spraying Tools: Gravity Gun: 1.2-1.5MM 4 bar 

Suction Gun: 1.4-1.6MM 25 micron 

Spraying method: 1-2 layers or three layers twin jet spray every single channel flash dry for 5-10 minutes 

Drying time: standing before baking: 3 hours / 20 ℃; 5 Minutes 30 Minutes / 60 ℃ 

Polished: tin body surface phosphate processing, otherwise, first with P80 sandpaper sprayed area. After spraying with P360-P400 

Substrates: original paint, stainless steel, wood. Aluminum. White metal, putty, galvanized steel, glass and steel 

NA substrates: thermoplastic acrylic paint: erosion treated with acid primer or metal alloy substrate, plastic parts


e爱心提醒.jpg

1 can provide good adhesion of putty; 

2. spray tin, aluminum and other surface with P180 dry grinding, with the exception of oil clean feeling, then let stand for 10 minutes before spraying. 

3 chemical resistance; 

4 for electrostatic spraying. 

5. at 20 ℃ drying time over 48 hours. 

Spray friction layer money again, epoxy primer layer must be polished. 6. brushing mixing ratio: 4: 1: 2; 7 after instant access to some of the products can lids tightly.

Prev: No Prev
Next: 2K hardener in the primer
顶部微信二维码底部
扫描二维码关注我为好友
网站首页
ag8旗舰厅